Ceiling Fan
The summer is on its way. And
you might need a fan to cool yourself down, and the folding fan or the electric mini fan
might be not enough for the scorchers. In addition to table and floor, the
industry also produces vents and ceiling fans. They require not only network
connectivity, but also secure, especially important to approach this aspect in
relation to the ceiling fan, like the converter motor ceiling fan.
1. Do not attach the fan vents
to the windscreen. It may crack during drilling of holes or screwing screws in
them, and after the device has been connected successfully - under the
influence of vibration. Completely remove the glass from the window cut on his
size a sheet of plywood, pre-cut a large hole for the fan and drill four small
mounting. Insert a sheet in the window, secure it the same way as was
previously hitting the glass, let the putty harden, and then install the fan.
If the applicable device type VN-2, do whatever it takes in order to exclude a
short circuit, because the conclusions he has are very close to each other. The
window plastic Windows to install the fans cannot.
2. For fixing of ceiling fan
you must first make sure that the ceiling is suitable for screwing in screws,
and that they will withstand a load of the weight of the device and its
vibration. First disconnect the power supply, and then screw to the ceiling a
special plate included in the kit apparatus, turning her bottom toward the
ceiling and passing through the pre-wire. These wires connect to the contacts
located on the plate of the terminal block as indicated in the instructions.The
number of screws should be equal to the number of fastening holes in the plate
to reduce its unacceptable. Make sure that they have not pierced the wire,
installed in the ceiling.
留言
發佈留言