Modern Water Supply System for Garden

The main thing in gardening is to ensure regular watering of the site. Without it, any garden will not withstand even one season. Watering by hand requires much time and labor with the wall mounted hose pipe with hose to tap connector. For a good garden, you need modern water supply system, where an important element is the electromagnetic valve for irrigation.

The main elements of the irrigation system as follows:

Sprinkler head, is rolling from small to high-power pulsed and rotary. Solenoid valves for automatic watering. Tubing for flow distribution. Pump station, providing the necessary pressure in the system. A holding tank for regular water supply to the system. Hydrants to connect to the system with different objectives.

The advantage of the irrigation system expressed as follows: dosing water flow; the uniformity of application; - efficiency (watering at night reduces evaporation of moisture); the system is under ground, saves labor and time gardener, compared with high pressure garden sprayer.

Electromagnetic valve for irrigation is always needed, even if there is no irrigation system. It is used together with a timer that includes it at the right time. It is especially desired to fill the storage tank. When water is supplied on schedule, the timer opens the valve, and the tank is filled. At the same time, it is advisable to water the plot. All this is done in the absence of the owner. It remains only to irrigate hard to reach places.

The main purpose of the valve is to supply water to the irrigation system at a preset time. Suited for this device is 1 inch, letting in 50-100 l/min at pressures up to 10 ATM. It can also be used on short sections of irrigation, since the built-in controller allows you to configure the required local expenditure. It is suitable for irrigation with spray and drip when the pressure in the system is weak. One or more valves are installed on a drainage bed of gravel and close the box. This can be done in any convenient place.